一覧に戻る

Toyota MR2 SW20

By Updated

The Toyota MR2 (SW20) is the second-generation MR2, a mid-engine, rear-wheel-drive two-seater built from October 1989 to 1999 across five revisions. Turbo models use the 2.0-liter 3S-GTE, rated from 200 hp in the US to 245 PS in late Japanese cars. In Japan, Team Taisan's MR2 won the JGTC GT300 championship in 1998 and 1999.

トヨタ・MR2

査読2026.11

自動車銘鑑
Editorial review

型式Chassis
SW20
製造者Maker
Toyota
年式Years
1989-1999
用途Class
Mid-Engine Sports Car
添付写真Plate 01 / 20
Plate 02
Plate 03
Plate 04
Plate 05
Plate 06

参考動画Reference footage

Specifications

JDM Mei Kan spec sheet: Toyota MR2 (SW20)
Engine unit3S-GTE
Displacement2.0-liter (Turbo)
Power200 hp (US Turbo) to 245 PS at 6,000 rpm (late JDM Turbo)
Torque31 kgm (304 N·m) at 4,000 rpm (JDM Turbo)
DrivetrainMid-engine, rear-wheel drive
TransmissionE153 manual (Turbo); automatic available on the G-Limited
Kerb weight1,270 kg (JDM Turbo, claimed)
Weight dist. F:R44:56 (commonly quoted)
L × W × H164.2 in long × 66.9 in wide (about 4,170 × 1,700 mm)
Wheelbase94.5 in (about 2,400 mm)
Production69,015 JDM cars; worldwide estimates 114,000 to 130,732 (disputed)

The Toyota MR2 (SW20) is the second-generation version of Toyota's mid-engine two-seater, built from October 1989 to 1999, with a turbocharged 3S-GTE reaching 245 PS in later Japanese-market cars. Wider and lower than the original AW11, it traded angular styling for curved, Italian-influenced bodywork that earned it the "Baby Ferrari" nickname. It ran through five revisions, left the US market after 1995 and stayed in Japanese production until 1999. In Japan, Team Taisan's MR2 won the JGTC GT300 championship in 1998 and 1999, inspiring the rare TRD2000GT widebody. Toyota never published a production total, and recorded US sales range from $3,802 to $125,000.

History & Motorsport Heritage

The MR2 nameplate began with the AW11, which reached showrooms in 1984 after a development process that traced back to the mid-1970s under Akio Yoshida, running through the SA-X prototype of 1981 and the SV-3 concept of 1983. Lotus engineer Roger Becker and racer Dan Gurney had input on the original car's chassis and suspension development.

The SW20 replaced the AW11 in October 1989 as a completely redesigned car. In the United States, Toyota sold the SW20 from 1991 to 1995, after which the MR2 name left American showrooms until the much less powerful MR2 Spyder arrived in 2000. Japan kept the car in production for four more years, through five revisions in total, and the last two revisions were never officially sold in the US.

Dan Gurney's All American Racers had already built Toyota's American racing reputation before the SW20 existed, running Celica-based cars in IMSA's GTO and GTU divisions from 1983 to 1988 before moving to purpose-built Eagle GTP prototypes with Toyota engines. That program predates the SW20 and isn't directly tied to it. US-market SW20 racing stayed largely at showroom-stock and club level, including entries in the IMSA Firehawk Series in 1992 and 1993.

The SW20's main motorsport chapter played out in Japan, in the GT300 class of the Japan Grand Touring Championship (JGTC). Team Taisan won the GT300 drivers' and teams' titles in 1996 and finished second in 1997, then campaigned a new MR2 in cooperation with Tsuchiya Engineering. The sources reviewed for this profile do not say which car the team used for its 1996 title. The MR2 itself made its GT300 debut in 1997, with a class win in the third round, fifth place in the fourth, third in the sixth and two retirements. It then won the class title in consecutive years:

  • 1998: five victories from seven rounds and the title with 106 points, 60 ahead of Manabu Orido's Toyota Celica ST205, with Keiichi Suzuki and Shingo Tachi driving the #25 car
  • 1999: a second title with a single win, despite the Nissan Silvia S15 taking four victories that year

That JGTC success led directly to the road-going TRD2000GT widebody, covered in the successor section below.

Toyota also took the SW20 platform into international GT racing through its works tuner SARD, which built the MC8-R, a heavily modified MR2 with a lengthened, custom rear structure housing a twin-turbo 4.0-liter 1UZ-FE V8 of around 600 bhp. Results at Le Mans were poor. The car retired after 14 laps on its 1995 debut, finished last in class in 1996 (97 laps behind the winning Porsche 911 GT1) and failed to qualify in 1997. SARD built two MC8 road cars to meet homologation rules, a white car for 1995 and a black car for 1997.

On the rally side, the SW20 Turbo's 3S-GTE engine shared its architecture with the version fitted to the Toyota Celica GT-Four ST185, a car that won three consecutive WRC drivers' titles between 1992 and 1994.

Exclusivity & Production Run

No single confirmed production total exists for the SW20. A New Zealand owners' club, working from Toyota parts and VIN data, puts Japanese-market (right-hand-drive) production at 69,015 units built between December 1989 and August 1999. That figure excludes every export car.

A widely circulated worldwide figure of 130,732 units traces back to the "MR2 Wiki" and is repeated by registries and several enthusiast sites. The forum thread that surfaces the Japanese figure disputes the wiki's reliability, arguing that its US-centric sourcing skews global numbers. A separate chassis-number compilation from an owners' forum lists the final known SW20 VIN as 114383, a red 1999 GT built that August, which doesn't match the 130,732 figure either.

Toyota has not published a factory total. Estimates run from about 69,000 (Japan only) to between 114,000 and 130,732 worldwide, depending on the source.

The Japanese-market model split is better documented, again from the New Zealand club's VIN-based analysis:

  • GT: 30,368 built, all manual (11,114 with T-Bar roof, 19,254 hardtop coupe)
  • G-Limited: 38,647 built (14,769 automatic, 23,878 manual; 16,595 T-Bar roof, 22,052 hardtop coupe)
  • Rare factory colors: code 999 (found on only 3 VINs) and 3L1 (found on 92 VINs)

Production spanned five revisions, commonly labeled Rev 1 to Rev 5, covering styling, engine tuning and equipment changes. US buyers received only Rev 1 and Rev 2 cars, roughly the 1991 to 1995 model years; Rev 3 to Rev 5 (1996 to 1999) were sold only in Japan. Buyer's guides describe those later Japanese cars as more predictable than the 1989 to 1991 Rev 1 cars, after years of suspension, brake and ECU revisions. Under the US 25-year rule, the first SW20s, built in December 1989, became eligible for import in December 2014, and the last, built in August 1999, became eligible in August 2024.

Beyond the standard GT and G-Limited, a few far rarer variants exist. Toyota TechnoCraft built a small run of SW20 Spider convertibles between 1996 and 1999, with a retractable cloth top, a wingless trunk lid and a unique engine cover, and a few reached the UK. The TRD2000GT widebody (35 to 37 cars, covered in the successor section) and the two SARD MC8 homologation road cars are the rarest SW20s of all.

Aerodynamics & Design Philosophy

Where the AW11 was defined by folded, angular panels, the SW20 moved to rounded, Italian-influenced surfacing that drew regular comparisons with the Ferrari 348 and 355. A team led by Kunihiro Uchida designed the shape, aiming for a more aggressive, exotic look while keeping functional aerodynamics.

The new car was larger in every main dimension. Compared with the AW11, the SW20 was 245 mm longer and 30 mm wider, on a wheelbase stretched by 80 mm, and sat 10 mm lower. In imperial terms, the wheelbase grew to 94.5 inches (about 2,400 mm) and overall length to 164.2 inches (about 4,170 mm), with a width of 66.9 inches (about 1,700 mm). The extra structure and glass added 350 to 400 pounds over the outgoing car, bringing curb weight to roughly 2,650 to 2,789 pounds depending on specification.

Toyota's 1989 launch press release put numbers on the aerodynamic work: a drag coefficient of 0.31, a front lift coefficient of -0.004, a rear lift coefficient of 0.05 and a yawing moment coefficient of 0.19. Toyota credited these figures with improving high-speed handling, straight-line stability and crosswind stability. A Cd of 0.31 matched the Lamborghini Diablo, against 0.32 for the Honda NSX and 0.33 for the Ferrari 355.

Some of the aerodynamic and styling work came from material choice rather than shape alone. Toyota used newly developed Sheet Molding Compound for the side air intakes, the rear cabin buttress molding, the two-stage rear spoiler and the engine cover, a material chosen for surface quality as much as weight.

Structurally, the SW20 carried five bulkheads for added rigidity and kept an independent suspension layout, with revised geometry aimed at higher cornering speeds than the AW11 could manage. Turbo and naturally aspirated cars looked nearly identical apart from badging and a taller decklid on Turbo models, and buyer's guides note pop-up headlights on the pre-1994 cars.

3S-GTE · Powerplant

Engine specifications varied by market and trim, which is one reason SW20 power figures are quoted inconsistently. The lineup:

  • US naturally aspirated: 2.2-liter 5S-FE inline-four, shared with the Camry, making 130 hp
  • Japanese and European naturally aspirated: 2.0-liter 3S-GE inline-four, up to 197 hp in top Japanese tune; one dealer spec sheet lists the Coupe's 3S-FE at 138 hp and the GT Coupe's 3S-GE at 154 PS
  • US Turbo: second-generation 3S-GTE inline-four, 200 hp and roughly 200 lb-ft of torque
  • Japanese Turbo (later revisions): 3S-GTE rated at 245 PS (180 kW) at 6,000 rpm and 31 kgm (304 N·m) at 4,000 rpm

Sources disagree on the Japanese Turbo figure. Some buyer's guides cite 225 PS rather than 245 PS, and enthusiast dyno results claim real-world stock output of 240 to 268 hp, though those are unverified forum figures rather than factory ratings. Across years and markets, the Turbo was rated at 200 to 245 hp, with the top figure reserved for the later Japan-only revisions.

The 3S-GTE was produced from 1986 to 2007 and used in the Celica ST165, ST185 and ST205, the MR2 and the Caldina GT-T and GT-Four. It is based on the naturally aspirated 3S-GE, with a cast-iron block, forged crankshaft and connecting rods, and lightweight aluminum pistons. The 16-valve DOHC aluminum cylinder head, with centrally located spark plugs in pent-roof combustion chambers, was designed by Yamaha.

Third-generation 3S-GTE units, used in the later MR2 and the ST205 Celica, added a water-to-air top-mounted intercooler, revised camshafts (240/236 degrees duration, 8.7/8.2 mm lift), 540 cc injectors and a 60 mm throttle body, with peak boost raised to 13 psi. Output in that form rose to 245–255 hp at 6,000 rpm, with 224 lb-ft (304 N·m) at 4,000 rpm.

In stock form, a US-spec MR2 Turbo reaches 60 mph in about 5.8 to 6 seconds, roughly matching a contemporary Mustang GT. The claimed curb weight for the Japanese Turbo is 1,270 kg. The drivetrain has proven strong enough for serious tuning: 3S-GTE engines are regularly pushed past 400 hp with bolt-on modifications, and some built engines exceed 800 whp on the dyno.

Turbo and naturally aspirated cars differ well beyond the engine bay. Turbo models use a stronger, heavier E153 gearbox with unique ratios, stronger axles, a larger fuel pump and radiator, and twin-piston front brake calipers, which the 3S-GE cars share. Cars with the base 5S-FE make do with single-piston front calipers.

Chassis, Suspension & Handling Dynamics

The SW20 uses fully independent coilover suspension with MacPherson struts at all four corners, arranged around a transverse mid-mounted engine. Weight distribution is usually quoted as 44 percent front and 56 percent rear, though individual cars vary with fuel load, options and modifications; one owner's corner-weight measurement returned 46/54.

That rear weight bias, combined with the early suspension geometry, gave the first SW20s (Rev 1, 1989 to 1991) a reputation for snap oversteer. Lifting off the throttle mid-corner in an early car could bring the rear around quickly enough to catch inexperienced drivers off guard. Toyota's engineers reportedly described the fix as being needed "for drivers whose reflexes were not those of Formula One drivers." The technical cause was dynamic toe change and roll-center movement: the chassis behaved predictably while it stayed flat but lost composure under heavy weight transfer. Rev 1 cars used shorter rear lateral links, which produced more camber and toe change under load than the longer arms fitted from Rev 2 onward.

Toyota addressed the issue with the facelift that began Rev 2, which brought revised rear suspension geometry, wider rear tires, larger 15-inch wheels and power steering. Sources date it differently: one buyer's guide gives January 1992, while Car Throttle says late 1992. Rev 2 Turbo models also gained a viscous limited-slip differential, improved transmission synchronizers for smoother shifts, larger brakes and a bigger front bumper lip. A further update in June 1996, on the later Japan-only revisions, refined damper tuning, brake calibration and ECU mapping.

Later cars also used variable-assist power steering with a quicker rack, which made counter-steering easier once the rear did break loose. Every SW20 ran a staggered wheel and tire setup, with wider tires at the rear than the front to help manage the weight bias.

Owners with track experience tend to push back on the car's worst-case reputation. An early Rev 1 Turbo will snap into oversteer under abrupt lift-throttle inputs, but drivers with seat time generally report it as more manageable than its reputation suggests, particularly with the Rev 2 geometry, wider tires and power steering.

Nomenclature & Lore

MR2 officially stands for "mid-ship run-about 2-seater," sometimes explained as "mid-engine, rear-wheel-drive, 2-seater." Both describe the same layout, and owners casually call the car "Mister Two."

The name caused a problem in French-speaking markets, where "MR2" spoken aloud sounds close to the French profanity "merde," so Toyota renamed the car simply "MR" for sale there.

The SW20's styling, with visible inspiration from the Ferrari 348 and 355, earned it the "Baby Ferrari" nickname among enthusiasts and import specialists, sometimes rendered as "poor man's Ferrari" for its resemblance to Ferrari's lineup, including the 308. One lower-authority source claims Toyota briefly considered naming the second-generation car "MR3" before keeping MR2 for brand recognition. That claim appears in a single source and is unconfirmed.

Auction Records & Modern Market Value

SW20 values have risen in the past few years, and the spread between the cheapest and most expensive recorded sales is wide. US auction data shows:

  • Highest recorded sale: $125,000 for a 1991 MR2 Turbo GT-S, April 2, 2025
  • Lowest recorded sale: $3,802 for a 1991 MR2 GT-i, February 17, 2023
  • Average, all second-generation sales: $21,379
  • Average, Turbo only: $24,944
  • Lowest recorded Turbo sale: $5,200 for a 1991 MR2 Turbo, August 10, 2026

Bring a Trailer results show how far the market has moved. A 1995 model with 67,000 miles sold there for $61,750 in 2022, the highest recorded MkII Turbo sale at the time, while the cheapest MkII Turbo on the platform sold for $7,128 with 171,000 miles, also in 2022. MkII Turbo sales between 2020 and 2025 averaged $22,955. A forum discussion reports an 8,000-mile 1995 Turbo selling for around $71,000, a figure not confirmed against the auction record. The $125,000 sale in April 2025 shows the ceiling has kept rising since 2022.

Hagerty values a fair-condition 1992 Turbo at around $9,000, a good-condition car at around $19,400 and a pristine example at up to $56,400, and one outlet called the 1992 Turbo the cheapest mid-engined turbo car you can buy.

Even the rare TRD2000GT widebody doesn't guarantee a premium. One 2021 listing with 149,000 miles and a worn clutch was bidding at just $13,750, a reminder that condition and mileage still matter more to price than rarity alone.

In the UK, an average-condition second-generation MR2 is valued at around £13,918, with the most expensive recorded UK sale at £55,092 and the cheapest at £562.

Across these sources, Turbo cars command the strongest prices. Late Japanese Rev 5 examples with the CT20b turbo and 245 PS rating sit at the top of the collector market, alongside Japan-only G-Limited naturally aspirated cars and the TRD2000GT widebody.

Keeping the Legend Alive (Restomod & Specialist Culture)

The TRD2000GT is the SW20's best-known factory-backed special edition, and it exists because of the car's JGTC success. After the 1998 season, Toyota's specialty production arm, Technocraft, offered a limited run of road-going lookalike conversions to customers who contacted their local TRD distributor. One TRD2000GT history says the MR2s won the GT300 class at every round but one that year, while the season record gives five wins from seven rounds. Most sources give 35 conversions, though some cite as many as 37.

Each conversion used lightweight fiberglass panels (front fenders, a trunk lid extension, rear quarter panels, a fuel door, front and rear bumpers and a three-piece wing) and widened the track by 60 mm front and rear. Because of the extent of the changes, converted cars were re-registered as new vehicles with their own TRD-specific VIN plates. Power varied by customer order: some cars were built to produce as much as 500 bhp, others received only modest engine work, and not every TRD2000GT was turbocharged.

Toyota's parts support for standard SW20s has held up well for a platform of this age. Nearly all mechanical parts remain available from Toyota, with only some plastic trim pieces recently discontinued. New body panels are harder to find, but a healthy used-parts market and reproduction rocker panels, which address the SW20's most common rust point, help fill the gap. Independent specialists such as MR2-BEN, TCB Parts, TB Developments and Rogue Motorsport support engine work and tuning, and Woodsport is known for engine conversions and wiring diagnostics. Owners' clubs remain active, including the MR2 Owners Club, the International MR2 Owners Club, the MR2 Drivers Club and online communities such as mr2.ie.

Engine-swap culture around the SW20 runs in both directions. The 3S-GTE has been fitted to older Toyota Starlets, AW11 MR2s and seventh-generation Celicas, while some builders now go the other way, swapping Honda K-series engines into SW20 shells.

Toyota is developing what enthusiasts expect to be the MR2's spiritual successor, though it has not confirmed a production name. GR chief engineer Naohiko Saito told Auto Express that internal testing found a mid-ship, all-wheel-drive layout offers the best setup for high-performance driving, so the new car, unlike any SW20, is expected to drive all four wheels. Its design is expected to draw on the FT-Se concept shown in 2023, with power from Toyota's new turbocharged 2.0-liter G20E four-cylinder, targeting more than 400 hp in road form. Toyota is using Japan's Super Taikyu endurance series as a development testbed, and in late 2025 it filed trademarks for both "GR MR2" and "GR MR-S" in Japan.

Timeline expectations have shifted since early reporting. Forbes speculated in 2024 about a launch around 2026 at near $65,000, but as of mid-2026 Toyota Gazoo Racing has said the project is only in Stage 1 of a four-stage development process, with executives saying four to five more years of engineering and testing are needed. That points to a showroom arrival around 2029 or 2030.

FAQs

What are the Toyota MR2 SW20 specs?

Turbo models use a 2.0-liter 3S-GTE inline-four rated at 200 hp in US cars and up to 245 PS at 6,000 rpm with 31 kgm (304 N·m) at 4,000 rpm in later Japanese cars, through a stronger E153 gearbox. The claimed curb weight for the Japanese Turbo is 1,270 kg, and Toyota quoted a 0.31 drag coefficient at launch.

How bad is the MR2 SW20 snap oversteer?

Early Rev 1 cars (1989 to 1991) can snap into oversteer on abrupt lift-off, because their shorter rear lateral links produced larger camber and toe changes under load. The 1992 facelift (dated January 1992 by one buyer's guide and late 1992 by Car Throttle) brought revised rear geometry, wider rear tires, 15-inch wheels and power steering, and owners with track time generally find the car more manageable than its reputation suggests.

How many Toyota MR2 SW20s were made?

Toyota has not published a single total. A VIN-based count puts Japanese-market production at 69,015 cars from December 1989 to August 1999, while worldwide estimates range from about 114,000 to 130,732 depending on the source.

Did the Toyota MR2 SW20 race?

Yes. In Japan, Team Taisan's MR2 won the JGTC GT300 championship in 1998, with five wins from seven rounds, and again in 1999 with a single win. Toyota's tuner SARD also built the MR2-based MC8-R for Le Mans, where it retired in 1995, finished last in class in 1996 and failed to qualify in 1997.

How much is a Toyota MR2 SW20 worth?

Auction data shows an average of about $21,379 for second-generation cars and $24,944 for Turbos, with a record $125,000 for a 1991 MR2 Turbo GT-S on April 2, 2025. Hagerty values a 1992 Turbo at about $9,000 in fair condition and $56,400 in pristine condition.

Is there a new Toyota MR2 coming?

Toyota is developing a mid-engine, all-wheel-drive sports car widely expected to succeed the MR2, and filed trademarks for "GR MR2" and "GR MR-S" in Japan in late 2025. As of mid-2026 the project was in Stage 1 of a four-stage development process, pointing to a showroom arrival around 2029 or 2030.

結 · IN CLOSING

銘鑑

The Toyota MR2 (SW20) was Toyota's second-generation mid-engine sports car, built from October 1989 to August 1999 across five revisions. Turbo models used the 3S-GTE, rated at 200 hp in the US and up to 245 PS at 6,000 rpm in later Japanese cars, while naturally aspirated versions used the 3S-GE, 3S-FE or US-market 5S-FE. Toyota quoted a drag coefficient of 0.31, and the Japanese Turbo has a claimed curb weight of 1,270 kg, with MacPherson struts at all four corners and a 44/56 weight distribution. Early Rev 1 cars earned a snap-oversteer reputation that Toyota addressed with revised rear geometry, wider tires and power steering in the 1992 facelift. Production totals are disputed, from 69,015 Japanese-market cars to a widely repeated but unverified 130,732 worldwide. In Japan, Team Taisan's MR2 won the JGTC GT300 championship in 1998 and 1999, which led to the 35 to 37 TRD2000GT widebody conversions. Every SW20 is now old enough for US import. Recorded US sales range from $3,802 to $125,000, with late Japanese Turbo cars at the top. Toyota is developing an all-wheel-drive mid-engine successor not expected before 2029 or 2030.

About this entry

Edited by . AI tools help gather the research and write a first draft; every entry is then edited by hand before it is published. This entry was last reviewed in November 2026. Spotted an error? Send a correction →